Videovox Pro LNS series Manuel d'utilisateur télécharger pdf (Page 19)

5 Installation

5.1 Surface Dome Installation

Step 1 —— Draw a location hole

Bring the bracket-anchor out from the package.

Draw four holes in the wall in accordance with

the four holes of bracket-anchor.

Step 2 —— Make holes and screw expansion bolt

Make four holes and screw in four M8

expansion bolts.

Note: Expansion bolts are not included in the

accessory package.

Step 3 —— Loose bolts on both sides

Take the dome out of the package, open the

transparent cover by loosing 2-M 4*6 stainless

bolts.

Note: Be careful; pay attention to the

transparent cover!

Step 4 ——Remove transparent cover

Remove transparent cover from the dome.

Note: Be careful; pay attention to the

transparent cover!

2-M4×6 Stainless bolts

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 60 61

Pas de commentaire

Videovox Pro LNS series Manuel d'utilisateur Page 19